How to create an SRT file: in Notepad or from your video
An SRT file is plain text made of blocks: a number, a time range and the caption text. To create one by hand, type the blocks in Notepad and save it as .srt, in UTF-8. To skip typing every timestamp, upload the video or audio to FilmScribe: we transcribe each word with its timing and you download the .srt.
Step by step
- 01 Upload the video or audio Upload the file to FilmScribe or paste a YouTube link. We transcribe every word with its timing.
- 02 Review the text Fix names, numbers and technical terms right in the transcript.
- 03 Pick the preset and fps TV, Netflix or YouTube, and the same frame rate as the project the captions are going into.
- 04 Download the SRT For the whole file or only the lines you select. For Final Cut, also as FCPXML.
- 05 Check readability Run the SRT through the reading speed checker and watch the first and last captions.
- 06 Upload or import Add it to YouTube as captions or import it into your video editor.
In this guide
- What an SRT file is
- What an SRT file looks like inside (example)
- How to create an SRT file in Notepad
- How to create an SRT file from your video, in FilmScribe
- Creating an SRT from audio
- SRT captions in another language
- Other ways to create an SRT
- Rules for a readable SRT
- Frame rate: the detail that makes captions drift
- Which format should you use: SRT, VTT or TXT?
- How to use the SRT file after you create it
- Checklist before you deliver the SRT
- Frequently asked questions
- Sources
SRT is the most widely accepted caption format in the world. Video platforms, editors and nearly every player can read it. That’s why, when someone says “send me the captions”, they almost always mean an .srt file.
In this guide you’ll see what an SRT file is, what it looks like inside, how to create one by hand in Notepad, how to create one from a video or from audio only in FilmScribe, the rules that keep it readable and how to check the file before you hand it over.
If you just want the finished file and not the walkthrough, the SRT generator takes your video or audio and gives you the .srt.
What an SRT file is
SRT (SubRip Subtitle) is a plain text file that stores two things: what was said and when it was said. It doesn’t store font, color or position. The player or editor that opens the file decides how it looks.
That simplicity is why SRT works everywhere. You can open it in Notepad, fix a word and save, with no special software.
What an SRT file looks like inside (example)
A real SRT with three blocks:
1
00:00:01,200 --> 00:00:04,050
Hey everyone, welcome back.
Today's episode is about time.
2
00:00:04,300 --> 00:00:06,900
Why do we always feel
like we don't have enough?
3
00:00:07,400 --> 00:00:09,800
I tracked every hour of my week.
Each block has four parts:
| Part | Example | Rule |
|---|---|---|
| Number | 2 | Sequential, starting at 1 |
| Timing | 00:00:04,300 --> 00:00:06,900 | hours:minutes:seconds,milliseconds, with a comma |
| Text | Why do we always feel | One or two lines |
| Blank line | Separates one block from the next |
Three details break files: a period instead of a comma before the milliseconds (that’s VTT, not SRT), an arrow other than --> with a space on each side, and a file saved in an encoding other than UTF-8, which turns accented characters into symbols. The SRT FilmScribe creates already comes out in this format.
How to create an SRT file in Notepad
You can create an SRT file with nothing but Notepad on Windows, no install needed. Here’s how:
- Open Notepad and start a blank file.
- Type the first block: the number
1on one line, the timing on the next (00:00:01,000 --> 00:00:04,000) and the caption text on one or two lines. - Leave a blank line and type block
2, with the timing of the next line of speech. Repeat to the end of the video. - Go to File, Save as. End the name with
.srt, likevideo_en.srt. - Set Save as type to All files. Skip this and Notepad saves
video_en.srt.txt, which no player reads as captions. - Set Encoding to UTF-8 and save. That keeps accented characters intact.
To test it, put the file in the same folder as the video, with the same name, and open the video in a desktop player that loads subtitles: the caption should show up at the time you typed. On a Mac, use TextEdit: switch the document to plain text (Format, Make Plain Text) and save it with the .srt extension, in UTF-8.
What usually goes wrong in a hand-made file:
| Symptom | Cause | Fix |
|---|---|---|
| The player shows no captions | The file was saved as .srt.txt | Save again with All files as the type |
| Accented characters turn into symbols | An encoding other than UTF-8 | Save again as UTF-8 |
| A number and a timestamp show up as text | No blank line between blocks | One empty line after every block |
| The editor rejects the file or skips a block | A period in the milliseconds, bad arrow | A comma before the milliseconds, --> with spaces |
| Captions come in before or after the speech | Timing typed by eye | Check against the video, or build it from the speech |
If the accents already came out wrong, our free subtitle encoding fixer detects the encoding and hands the file back in UTF-8. To set the timing with the video playing next to it, instead of typing every number, open the file in the online subtitle editor.
Notepad is fine for a few seconds of video or for fixing one word. On longer material, the work is in the timing: with blocks of up to 7 seconds, as in the readability table below, ten minutes of speech is more than 80 blocks, each with a start and an end to mark. That’s when it pays to create the file from the speech, as in the steps that follow.
How to create an SRT file from your video, in FilmScribe
1. Upload the video, the audio or a link
We accept MP4, MOV, MKV, WEBM, MP3, WAV, M4A and more, plus YouTube links to videos, Shorts and livestreams (once the replay is available). If what you want is the subtitles of a YouTube video, the YouTube subtitle downloader starts from the link. If only part of it matters, pick the start and end before processing: only that section is processed and counts toward your plan’s hours.
2. Let the transcript finish
We transcribe in 90+ languages, with automatic language detection, word by word, with the timing of every word and lines separated by speaker. Because timing is measured on the speech, each SRT block starts when the sentence starts, with no manual syncing.
3. Review the text
Use the transcript search to find names and technical terms and fix them right in the text. The fix applies to the SRT and to the clip captions. No SRT is better than its transcript, so this step is worth the time.
4. Pick the preset and frame rate
FilmScribe creates the SRT with TV, Netflix and YouTube presets and lets you choose the frame rate of the project the captions are going into. For Final Cut, captions also come as FCPXML.
5. Download the whole file or just a section
Download the SRT for the full recording, or select lines in the transcript and download the captions for just that section, along with the MP3, TXT or PDF of the same section if you need them. SRT is on every plan and works for audio-only uploads too. To start from the file, use the SRT generator; for the rest, see captions and transcription.
Creating an SRT from audio
An SRT depends only on the speech. That’s why FilmScribe can create captions from an MP3 or WAV, without the video:
- An audio-only podcast that’s getting captions on YouTube.
- Audio from the mixer or a field recorder, cleaner than the camera mic. The transcript comes out better and the captions fit the video, as long as both files start at the same point.
- A class or talk recorded on a phone, with a video file too large to keep uploading and downloading.
If the audio starts a few seconds before or after the video, every caption is early or late by the same amount. The free subtitle sync tool shifts the whole file by milliseconds.
SRT captions in another language
On Studio and Agency, FilmScribe translates captions into 9 languages while keeping every block’s timing: each caption enters and leaves at the same point as the original. You download one SRT per language, or the translated FCPXML for Final Cut. See how to translate subtitles.
Other ways to create an SRT
- From existing text. If you already have the script or lyrics, FilmScribe’s free SRT, VTT and TXT converter builds timing from reading pace. The timing is estimated, not measured on the speech, so check it against the video.
- In your video editor or on YouTube. Premiere Pro, DaVinci Resolve (in the paid version), CapCut and YouTube Studio generate auto captions and export the file. That makes sense when the whole project already lives there. It gets heavy with long material, when someone else needs to review without opening the project or when the same text needs other formats.
Rules for a readable SRT
A technically valid SRT can still be hard to read. The references most used in TV and streaming:
| Rule | Common reference |
|---|---|
| Reading speed | 17 to 20 characters per second (adults) |
| Characters per line | Up to 42 |
| Lines per block | 2 at most |
| Maximum block duration | About 7 seconds |
| Line breaks | At natural phrase boundaries |
Each client and platform may have its own style guide, and it beats this table. To check a file, paste it into FilmScribe’s subtitle reading speed checker: it flags blocks that go by too fast, long lines and overlapping captions.
Frame rate: the detail that makes captions drift
SRT stores time in milliseconds, but editors work in frames. If the captions were made for 29.97 frames per second and the project runs at 25, the start lines up and the end slowly falls behind. In FilmScribe, choose the project’s frame rate before you download. For an existing file, use the fps option in the subtitle sync tool.
Which format should you use: SRT, VTT or TXT?
| Format | What it stores | When to use it |
|---|---|---|
| SRT | Text and timing | Video editors, YouTube, players, client delivery |
| VTT | Text, timing and some styling | Web players and course platforms |
| TXT | Text only (with or without times) | Reading, review, scripts, documents |
FilmScribe delivers SRT, TXT and PDF from the same transcript. If you need VTT, the subtitle converter switches the format and saves in UTF-8.
How to use the SRT file after you create it
- YouTube: upload the file in the video’s subtitles section, in the right language.
- Premiere Pro: import the .srt and drag it onto the timeline. The guide on how to import SRT into Premiere Pro covers the route and common errors.
- DaVinci Resolve and Final Cut Pro: the free SRT to DaVinci Resolve and SRT to Final Cut tools prep the file for each editor.
- Animated captions: SRT doesn’t store animation. For Reels, TikTok and Shorts, FilmScribe burns animated captions right into the clip. See animated captions in Premiere and DaVinci.
Checklist before you deliver the SRT
- Opens in a text editor with no symbols in place of accented characters (UTF-8).
- Comma before the milliseconds and a
-->arrow with a space on each side. - No block ends after the next one starts.
- Two lines per block at most.
- Names checked in the FilmScribe transcript.
- First and last captions checked against the video.
- Same frame rate as the project.
- File name includes the language, like
video_en.srt, with a real .srt extension (notcaptions.srt.txt). - SRT created from the same file that will be published: timings are relative to the source.
Frequently asked questions
What is an SRT file?
It's a plain text file with a video's captions and the timing of each line. SRT stands for SubRip Subtitle. Each block has a number, a start and end time and the text. Almost every player, video editor and platform accepts SRT, and FilmScribe builds the file straight from the transcript.
How do I make an SRT file in Notepad?
Open Notepad and type each block in three parts: the number, the time line (00:00:01,000 --> 00:00:04,000) and the text, with a blank line between blocks. In Save as, give it a name ending in .srt, set Save as type to All files and Encoding to UTF-8. The format is easy; getting every line's timing right by hand is the hard part.
How do I create an SRT file from a video in FilmScribe?
Upload the video, the audio or a YouTube link. We transcribe in 90+ languages, with the timing of every word. Fix the text in the transcript, choose the TV, Netflix or YouTube preset and your project's frame rate, and download the SRT. If you only need part of it, select the lines and download the captions for that section.
Can I create an SRT from audio only?
Yes. An SRT depends on the speech, not the picture, so an MP3 or WAV uploaded to FilmScribe produces the same captions as the video. That helps when the mixer or recorder sounds better than the camera mic: the transcript is more accurate and the timing still matches the video, as long as both start together.
Why do my SRT captions drift later as the video plays?
It's almost always a frame rate mismatch: the captions were made for 30 frames per second and the video runs at 25, for example. The start lines up and the end slips. In FilmScribe, you pick the project's frame rate before downloading. For an existing file, the free subtitle sync tool converts the fps.
What's the difference between SRT and VTT?
Both store text and timing. SRT uses a comma before the milliseconds and is the format video editors accept most. VTT (WebVTT) uses a period, starts with a WEBVTT line and is common in web players. FilmScribe's free converter switches between them without changing the timing.
How many languages can FilmScribe create SRT files in?
The transcript, and so the SRT, works in 90+ languages, with automatic language detection. On Studio and Agency, captions can also be translated into 9 languages while keeping every block's timing, and you download one SRT per language.
Sources
The official documentation behind the numbers and rules in this guide.
- 01Supported subtitle and closed caption files(opens in a new tab) · YouTube Help
- 02Add subtitles and captions(opens in a new tab) · YouTube Help
- 03Netflix Timed Text Style Guide: English (USA)(opens in a new tab) · Netflix
- 04Netflix Timed Text Style Guide: General Requirements(opens in a new tab) · Netflix
- 05WebVTT: The Web Video Text Tracks Format(opens in a new tab) · W3C